Tools
Camera test
Check that your webcam works, see the resolution it really delivers, measure its frame rate and smoothness, and frame yourself for a stream or a call. Works with USB webcams and laptop cameras.
Camera test
Everything runs inside this tab. The page turns on your camera only after you press Start, the video is never uploaded or recorded on a server, and snapshots are saved only if you download them yourself.
When you press Start camera, the browser asks whether this site may use your camera. Choose Allow. Camera names appear in the list only after that. Most webcams turn on a light while in use, and Stop switches the camera off again.
1. Live preview
Mirror only flips the preview on this page, the way a mirror would. The camera itself and snapshots are not flipped. The grid splits the picture into thirds; keeping your eyes near the top line is a common framing for a facecam.
2. Resolution
Webcams only support a fixed list of sizes. When you ask for one the camera does not have, the browser picks the closest match, and some browsers scale a larger picture down. Higher resolutions can lower the frame rate, especially on USB 2.0 ports or with older webcams.
3. Frame rate and smoothness
Measured over the last 3 seconds from the frames that actually reach this page. Jitter is how much the gap between frames varies; lower is smoother. A late frame took more than 1.5 times the usual gap. If this tab is in the background or the computer is busy, the page sees fewer frames than the camera sends, so test with the tab in front.
4. Brightness hint
A rough hint from the average brightness of a small copy of the picture (0 = black, 100 = white). It is relative and uncalibrated, not a light meter, and the camera's own auto exposure changes it all the time.
5. What the browser reports
Current settings
Start the camera to read its settings.
Capabilities (what the camera says it can do)
Start the camera to read its capabilities.
Controls such as zoom, focus and exposure appear only when both the camera and the browser expose them; many webcams and browsers do not. The camera's own software may offer more settings than a browser can see.
How to use the camera test
- Press Start camera and choose Allow when the browser asks. The page cannot see anything before that, and Stop and release camera switches it off again.
- If you have more than one camera, pick the one you want from the Camera list. Names appear only after you allow access; that is how browsers protect your privacy.
- Choose a resolution and frame rate to ask for. The page shows what the camera actually delivers next to what you asked for. Find max resolution asks for far more than any webcam has, so the browser opens the largest size it can.
- Leave the tab in front for a few seconds and read the measured frame rate, frame time and jitter. Compare the measured number with what the camera reports.
- Turn on the framing grid, check the brightness hint, and take asnapshot before and after you change your lighting to compare.
Camera not detected or blocked: how to fix it
In the browser
- If you clicked Block by mistake, click the icon at the left of the address bar, set the camera permission for this site to Allow and reload the page.
- Browsers only let pages use the camera over a secure (https) connection, and some block it inside embedded frames. Open this page directly in a normal tab.
On Windows
- Privacy settings. On Windows 11, open Settings, then Privacy & security, then Camera. Turn on Camera access, Let apps access your camera and Let desktop apps access your camera. Browsers, Discord and OBS count as desktop apps. On Windows 10 the same switches are under Settings, then Privacy, then Camera.
- Camera in use. If the page says the camera could not be started, another app probably has it open. Close Discord, OBS, Teams, Zoom and the Windows Camera app (check the system tray too, since some keep running in the background), then press Start camera again.
- Still nothing. Unplug the webcam and plug it into a different USB port, ideally one directly on the PC rather than a hub. If it does not appear in Device Manager under Cameras or Imaging devices, the problem is the cable, the port or the camera itself.
On a Mac
Open System Settings, then Privacy & Security, then Camera, and switch on access for your browser (and for Discord or OBS if those are the problem). Quit and reopen the app if it was running when you changed the setting.
Hardware switches
- Many webcams and laptops have a sliding privacy shutter over the lens. A black preview with the camera light on often means the shutter is closed.
- Some laptops can switch the camera off with a function key that has a camera icon, or with a separate switch. When the camera is switched off this way, the system may not see it at all.
Low frame rate or a dark, grainy picture
- Light is the big one. With auto exposure, a webcam in a dim room keeps each frame exposed for longer to get enough light. A 30 fps camera has about 33 ms per frame, so if it wants a longer exposure than that, the frame rate has to drop. Put a light in front of you, not behind you, and the measured frame rate often goes back up. My guide on lighting a desk without glare covers lamp placement.
- USB bandwidth. Uncompressed 1080p video at 30 fps needs more bandwidth than a USB 2.0 connection can carry, so webcams send higher resolutions as compressed video, usually MJPEG or H.264. If an app picks the uncompressed format (often shown as YUY2), it may only get a low frame rate at high resolution. Hubs and front panel ports shared with other devices can make this worse.
- Resolution and frame rate trade off. Many webcams reach their highest frame rate only at a lower resolution. Try 720p at 60 fps against 1080p at 30 fps with the presets above.
- The computer. A browser tab in the background, a game running, or a slow laptop on battery can all show fewer frames than the camera sends.
Webcam settings for OBS and Discord
Once the camera looks right here, the same numbers help you set it up for streaming or calls:
- OBS Studio: on Windows, open the properties of your Video Capture Device source and setResolution/FPS Type to Custom. You can then choose the resolution, the FPS and the video format. If the camera stutters at 1080p, try the MJPEG format or a lower resolution. Mygame recording software guide explains when OBS is worth it over Game Bar or the NVIDIA App.
- Discord: open User Settings, then Voice & Video, and pick your webcam under Camera. Use Test Video there to check the preview inside Discord.
- Only one app at a time. If OBS has the camera open, a browser or Discord may not be able to use it as well. Close this test before you go live.
A facecam is only half of a stream setup. Check your voice with themicrophone test and your headset with thespeaker and headset test. For where the camera and lights go on the desk, see how to put a gaming setup together.
Common questions
How do I test my webcam online?
Press Start camera on this page and allow access when the browser asks. If you see yourself in the preview, the browser can use the camera. The page then shows the resolution the camera delivers, the frame rate measured from real frames, and what the browser reports about the camera.
Is my video recorded or uploaded?
No. The preview and every measurement run inside your browser tab. Nothing is sent to a server. A snapshot is kept only in the memory of this tab until you delete it or close the page, and it is saved to your computer only if you press Save snapshot.
Why does the page say no camera was found or the camera could not start?
No camera found usually means the webcam is unplugged, switched off with a laptop key or privacy switch, or blocked by the system. Could not start usually means another app such as Discord, OBS, Teams or Zoom is already using it. Close those apps and check the camera privacy settings described below the tool.
Why is my webcam frame rate lower than it should be?
The most common reason is light. In a dim room many webcams lengthen the exposure of each frame to get a brighter picture, which lowers the frame rate. More light on your face often brings the frame rate back up. A busy or USB 2.0 port, a high resolution, or a busy computer can also lower it.
Why does the camera give a lower resolution than I asked for?
Webcams only support a fixed list of sizes. If you ask for one the camera does not have, the browser picks the closest one it can open. A 1080p webcam cannot deliver 4K, so asking for 4K gives you its largest size. Press Find max resolution to see the biggest size your browser can get from it.
My webcam works here but not in Discord or OBS. Why?
Each app picks its own camera and needs its own permission. In Discord, check the Camera selection under User Settings, Voice and Video. In OBS, check the device in your Video Capture Device source. On Windows, make sure desktop apps are allowed to use the camera, and close the other app first, because a camera is often usable by only one app at a time.
How accurate are the frame rate and brightness readings?
The frame rate is measured from the frames that actually reach this page, so it is a good real-world check but can read low if the tab is in the background or the computer is busy. The brightness hint is a rough, relative and uncalibrated reading of the average picture brightness, not a light meter.
Related tools and guides
- Sensitivity converter — Convert sensitivity between Overwatch, Valorant, CS2, and other titles using documented yaw values.
- cm/360 calculator — Turn mouse DPI and in-game sensitivity into centimeters per 360° turn.
- eDPI calculator — Multiply mouse DPI by in-game sensitivity for a same-game comparison number.
- FOV converter — Convert horizontal and vertical FOV across 4:3, 16:9, 16:10, and 21:9. Includes Overwatch, CS2, and Valorant.
- Frame-time and Hz calculator — Convert FPS to milliseconds, compare that wait to the monitor refresh, and read a 1% low as a frame time.
- Mouse polling-rate tester — Measure how often the browser sees pointer events. Average and max Hz.
- Mouse raw input test — See every mouse report as a dot, spot sensor skips, and check jitter, swipe speed, and acceleration.
- Mouse test — Check mouse buttons, the scroll wheel, double-click chatter, and a pointermove polling-rate reading in the browser.
- Keyboard test — Press keys on a US QWERTY board, then time your typing on real sentences or random letter strings.
- Gamepad test — See every controller button, analog trigger and stick live, check stick drift with a suggested deadzone, and test vibration.
- Microphone test — Mic level in dBFS, clipping, recording and a noise estimate.
- Speaker and headset test — Left and right channels, phase, frequency sweep and bass check.
- System info — OS, browser, GPU, CPU threads, RAM and screen your browser reports.
- Display test — Full-screen colours for dead and stuck pixels, banding and a measured refresh rate.
- Best game recording software — Game Bar, the NVIDIA App or OBS, and when you need each.
Comments
No comments yet. Be the first to share what you think.