Tools
Stuck pixel fixer
Drag a flashing colour patch over a stuck pixel, or flash the whole screen, with adjustable speed and a timer that stops by itself. It is worth a try for stuck pixels; it cannot bring back a dead one.
⚠ Photosensitivity warning: rapid flashing
This tool flashes saturated colours and noise up to 60 times a second. That is far above the three flashes per second that accessibility guidelines (WCAG) treat as the safe limit. Do not use it if you, or anyone who can see the screen, has epilepsy or is sensitive to flashing light.
You do not need to watch it: start it, then look away or leave the room. Stop at once (press Esc, or click or tap the screen) if anyone feels dizzy, sick or disoriented, or notices a headache, twitching or vision changes.
Flash pattern
Cycles the three primaries, so every subpixel is switched fully on and off.
A screen cannot change colour faster than it refreshes, so on a 60 Hz display anything above 60 is the same as 60.
Timer
Flashing stops by itself when the timer ends. Pausing pauses the timer.
Patch
Background around the patch
Black makes a lit stuck pixel easiest to spot; white shows a dark one.
Tick the warning box above to unlock flashing.
In fullscreen: drag the patch or use ←↑→↓ to move it by 1 px (Shift = 10 px), drag the corner or press +/− to resize, Space start or pause, F patch or whole screen, H hide the panel, Esc exit.
Stuck pixel or dead pixel?
Each pixel on an LCD is made of red, green and blue subpixels. Which kind of fault you have decides whether this tool is worth your time, so check first with the Display Test: open black, white, red, green and blue fullscreen and look at the dot on each.
| Stuck pixel | Dead pixel | |
|---|---|---|
| Looks like | A red, green, blue or white dot that stays lit | A black dot that never lights |
| Easiest to see on | Black (and colours that should hide it) | White |
| What is going on | One or more subpixels are not switching correctly | The pixel is not being driven at all |
| Can flashing help? | Sometimes, with no guarantee | Usually not |
A dot that is only wrong on one colour, for example dark on red but fine on green and blue, points to a single bad subpixel. Also wipe the screen before you decide: dust on the surface looks a lot like a pixel fault on a white field.
How to use the stuck pixel fixer
- Read the photosensitivity warning and tick the box. Flashing stays locked until you do.
- Move the browser window to the monitor with the fault, press Find the pixel and keep the black backdrop. Drag the gray patch over the dot. For pixel-exact placement, use the arrow keys (1 px a press, 10 px with Shift).
- Pick a pattern and speed, choose a 10, 20 or 30 minute timer, and press Start flashing. Then look away; you do not need to watch.
- When the timer ends, the patch stops and you can check the pixel on the backdrop. If it is still there, try another session or the Whole screen mode if you are not sure where the pixel is.
Pausing also pauses the timer, and the tool pauses itself if you switch tabs, because browsers stop drawing hidden pages. Keep the tab in front and turn off the screen saver for the session.
If flashing does not help
Photograph the pixel up close on the colour that shows it best, note when you first saw it, and read your shop's return policy and the brand's pixel policy. Rules for how many faulty pixels count as a defect differ by brand, panel type and sometimes by where on the screen the fault is, so check the exact wording for your model rather than relying on a general rule.
You will also find guides that suggest pressing or tapping on the pixel. That puts physical stress on the panel and can create new faults, so it is not something this page recommends. If the monitor is new, a return or warranty claim is the safer route. Shopping for a replacement? Start with the gaming monitors I would buy, IPS vs VA for gaming, and, if you are looking at OLED, how burn-in warranties read in what an OLED gaming monitor is.
Common questions
Does a stuck pixel fixer actually work?
Sometimes. A stuck pixel is a subpixel that is not switching as it should, and rapidly forcing it on and off is a common, harmless-to-try first step. Some stuck pixels clear, some clear and later come back, and many never change. Nobody can promise a result, and this page does not track success rates.
Can it fix a dead pixel?
Usually not. A dead pixel stays black on every colour, which typically means the pixel is not getting power or its transistor has failed. Flashing colours at it cannot repair that. Use the warranty or the shop return policy instead.
How long should I run it?
There is no proven length. Starting with a 10 to 30 minute session, rechecking, and repeating a few times is a sensible approach that does not tie up your screen for hours. The timer stops flashing automatically so you can walk away.
Which pattern and speed should I use?
There is no tested best setting. Red/green/blue switches each subpixel fully on and off; noise changes many colours at once. A moderate speed such as 10 to 30 changes a second is a reasonable start. Your screen cannot change faster than its refresh rate, so above 60 changes a second only helps on high refresh monitors.
Is it safe for my monitor?
Showing ordinary colours is what a monitor is built to do, so a flashing patch for a timed session is not expected to harm an LCD. On OLED screens, check the manual first: many OLED monitors include their own panel care or pixel refresh routine, and the maker may recommend running that instead.
Is it safe for me to watch?
No, do not watch it. Rapid flashing can trigger seizures in people with photosensitive epilepsy and can cause headaches or nausea in others. Start it, look away or leave the room, and stop at once if anyone feels unwell.
Does the patch move to the right place on a second monitor?
The patch can only cover the screen the browser window is on. Drag the browser window to the monitor with the stuck pixel before you open fullscreen, then position the patch there.
Related tools and guides
- Sensitivity converter — Convert sensitivity between Overwatch, Valorant, CS2, and other titles using documented yaw values.
- cm/360 calculator — Turn mouse DPI and in-game sensitivity into centimeters per 360° turn.
- eDPI calculator — Multiply mouse DPI by in-game sensitivity for a same-game comparison number.
- FOV converter — Convert horizontal and vertical FOV across 4:3, 16:9, 16:10, and 21:9. Includes Overwatch, CS2, and Valorant.
- Frame-time and Hz calculator — Convert FPS to milliseconds, compare that wait to the monitor refresh, and read a 1% low as a frame time.
- Mouse polling-rate tester — Measure how often the browser sees pointer events. Average and max Hz.
- Mouse raw input test — See every mouse report as a dot, spot sensor skips, and check jitter, swipe speed, and acceleration.
- Mouse test — Check mouse buttons, the scroll wheel, double-click chatter, and a pointermove polling-rate reading in the browser.
- Keyboard test — Press keys on a US QWERTY board, then time your typing on real sentences or random letter strings.
- Gamepad test — See every controller button, analog trigger and stick live, check stick drift with a suggested deadzone, and test vibration.
- Display test — Find dead and stuck pixels with fullscreen colours, and measure refresh rate.
- PPI and viewing-distance calculator — How big one pixel is on your screen.
- What monitor response time is — How fast pixels change colour.
- What a 1440p 240 Hz monitor is for — When the extra refresh helps.
- Best gaming monitor — Panels and refresh rates worth buying.
Comments
No comments yet. Be the first to share what you think.